| Power: |
30 hp @ 3,600 rpm |
| Aspiration: |
Natural |
| Cylinders: |
3 |
| Displacement: |
1123 cc |
| Weight: |
139 kg |
| Propeller: |
15″ x 9″ |
- RCD 2 (Recreational Craft Directive 2013/53/EU) exhaust emission compliant.
- EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant. Note: Extra charges apply and this must be specified at time of order.
- Mechanically governed comes with:
- Heat exchanger, header tank and water cooled exhaust manifold.
- Fresh and sea water pump, injection bend for a wet exhaust.
- Mechanical fuel lift pump, fuel and oil filtration.
- Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
- Special quiet air intake filter.
- 70 Amp, 12 Volt battery charging alternator.
- Complete with ‘ABV’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature and engine alternator ‘no charge; 3m interconnection cable with multi pin plug connector.
- Heavy duty engine feet and flexible mountings.
- R&D flexible coupling.
- ‘Morse’ type end fittings for engine speed and gearbox control.
- Engine test certificate and operators manual.
- Beta red paint.
Beta 30 30 hp @ 3,600 rpm
Technical Specifications
Power:
30 hp @ 3,600 rpm
Aspiration:
Natural
Cylinders:
3
Displacement:
mer
